manualshive.com logo in svg

North-Vision Tech Deluxe-100, User Manual

Share
Download
North-Vision Tech Deluxe-100 User Manual Download Page 48

User Manual for Multi-parameter Patient Monitor                                                    North-vision Tech. Inc. 

 

                                               

 

-

 

40  - 

 

 

2.  Plug: Connect the plug to the IBP socket on the monitor.   

3.  Dome: One end is connected to the blood vessels to be measured via aqueduct (or tube for transfusion). 

The aqueduct should be filled with liquid (blood or normal saline). The other end can be used for 

transfusing medicine. 

Please note the dome is one-off (can only be used once) and can not be 

reused.

   

4.  Clean the device: Put the pressure transducer into cleansing liquid and squeeze with your thumb and 

index finger so as to clean the remains of the pressure transducer.   

 

 

Precaution:   

1.  The transducer must be placed at the same height as the measured position   

2. 

The usage of Stopcock: “Off” to the channel and the channel will be closed.   

3.  The usage of the flush switch: Press it for opening.   

4.  0 calibration must be carried out before each measurement, and 100mmHg calibration also should be 

carried out when necessary.   

5.  Use the saline solution to expulse the air from the tube, the methods are as follows:   

Method 1:   

Turn  off  the  stopcock  (“Off”  to  the  direction where is  no  connector).  Input  the  saline  solution  into  the 
patient connector by syringe, and press Flash switch for opening until the saline solution run off through 

the vent and ensure there is no air bubbles in the tube.   

Method 2: 

 

Connect one end of the transfusion tube (with syringe) to the brine bag, and connect the other end to the 

vent. Apply pressure to the brine bag to let the pressure reaches 300mmHg-400mmHg, then press Flash 
switch for opening and turn off the stopcock (“Off” to the direction where is no connector) until the saline 
solution run off through the vent and ensure there is no air bubbles in the tube.   

6.  Transducer 0 calibration: Expulse all the air from the tube, then adjust the transfusion tube and stopcock 

(“Off” to the transfusion tube). Open the dust cap, and ensure the dome touch the air. Enter the system 

menu, and move the cursor to “0 calibration”, then press Navigation Knob and rotate it to choose 

“proceed”, and “succeed” will display on the screen. The value is less than 400 but not the 0.   

Summary of Contents for Deluxe-100



































































Reviews:

No comments

Brands by name

Popular brands

Load more brands