North-Vision Tech Deluxe-100 User Manual Download Page 24

Page: 24 / 66

User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc.

16 -

“2013-03-05 09:29:54”:

System current time and date. The current Figure shows the time and date of

March 05

, 2013, 09:29:54.

“Push knob for system menu”:

System prompt or description for the current status.

“NO NAME”:

Patient name. The patient name can be entered or changed in the archive

management window.

“000001”:

The patient ID. The patient ID can be entered or changed in the archive management

window.

Waveform area:

Waveform: The first waveform is ECG waveform.

Waveform: The second waveform is cascade of the first ECG waveform. Notice the second

waveform is displayed screen by screen, instead of continuous display in 1

waveform. The 2

waveform time

“09:29:46” is displayed on the upper right corner on the 2

waveform.

waveform: Respiratory waveform

waveform: SpO

plethysmograph

Data area:

Figure 4.3 Heart Rate Data Area

“

”: Indicates the current display is heart rate. The 60 on the right side is the heart rate measured.

“

”: The heart- beating symbol. Its flashing corresponds to the R wave of the ECG waveform. The

speed is the same as the heart rate.

“

ST -.--- mv

”: The measured milli-volts value during ST measurement.

“

×1”:

ECG waveform gain (amplification), 5 options available

“Auto” Automatic waveform gain.

“

1/2” half size of the basic waveform

“

1” Basic waveform

“

2” Twice the size of the basic waveform

“

4” Four times the size of the basic waveform

Summary of Contents for Deluxe-100



































































Search results

Summary of Contents for Deluxe-100

Reviews:

Brands by name

Popular brands

North-Vision Tech Deluxe-100, User Manual

Search results

Summary of Contents for Deluxe-100

Reviews:

Brands by name

Popular brands