Storage
36
b. Add fuel stabilizer to fuel tank.
c.
Run pressure washer with high pressure hose
at least 5
minutes after adding stabilizer to allow it to enter the fuel
system.
d. Shut off engine
2. Lubricate cylinder and piston:
a. Disconnect spark plug wire and remove spark plug
b. Add one teaspoon oil through spark plug hole
c. Place rag over spark plug hole and turn starter (or pull the recoil) a
few times to lubricate the combustion chamber.
d. Replace spark plug, but do not reconnect the spark plug wire.
Prepare pressure
washer for storage
Prepare the pressure washer for storage.
1. Disconnect the battery, remove it from the battery compartment, and
store it indoors.
2. Make sure the engine start switch is OFF and fuel valve is OFF.
3. Disconnect the engine spark plug wire if you haven’t already done so.
4. Disconnect the high-pressure hose, garden hose, and spray gun.
Move pressure
washer to storage
location
Let engine cool for 5 minutes
before moving the pressure washer to it’s
storage location.
