Assembly and Initial Set-Up
14
Prepare
Engine
Fill the engine with oil
.
Note: The engine is shipped without oil.
Refer to the Engine Manual to locate oil-fill port and for instructions on filling.
Use the oil grade and quantity specified in the Engine Manual.
Step 4. Battery Installation
Install a 12-volt standard lawn and garden battery (Group U1-7) with a minimum 18 amp-
hour rating.
CAUTION: A
battery must be installed before starting the engine
or damage to the engine
voltage regulator will result.
The battery is to be supplied by the customer and should be installed in the protective battery
compartment located near the engine. The inside dimensions of the battery compartment are 11-
1/8”L x 7-3/4”W x 10-1/8”H.
The battery compartment is shown in Figure 6 below. To install the battery, first remove the end
cap to gain access to the battery compartment. Follow the steps below for connecting and
disconnecting the battery.
WARNING
: Battery Hazards
Batteries are hazardous because they contain caustic acid, can emit explosive gases, and can
cause electric shock. Caution must be exercised when making connections to a battery to
avoid shock and contact with the acid, and to prevent any sparking that could lead to an
explosion. ALWAYS follow the general battery safety rules and instructions listed below.
Negative Battery
Terminal (-)
Black Battery
Cable
Positive Battery
Terminal (+)
Red Battery
Cable
Battery (NOT INCLUDED)
12VDC 18Ah Minimum
Battery Compartment
Figure 6
