Assembly and Initial Set-Up
10
Wheel
Qty-4
Hardware Bag
High Pressure Hose
Qty-1
Spray Gun
Qty-1
Handle
Qty-1
Pressure Washer
Steps for Assembly / Initial Set-Up
Step 1. Unpacking & Delivery Inspection
Step 2. Assembly
Step 3. Initial Pump & Engine Preparation
Step 4. Battery Installation
Each of these steps is discussed below:
Step 1. Unpacking & Delivery Inspection
Find and separate the components identified in Figure 2 – Overview of Pressure Washer
Components and Figure 3 – Hardware Bag. Inspect the power washer immediately after you
receive delivery for missing parts and damage.
•
If you have
missing
components, contact Product Support at 1-800-270-0810.
•
If you have
damaged
components, contact the freight company that delivered the unit and file
a claim.
Figure 2
