53
Assembly Instructions
Step 11 – Install Beam Assembly
NOTE:
Nut and bolt are installed (hand tight only) on pivot bracket
for packaging purposes.
Step 11 A:
Remove nut and bolt. They will be re-installed.
Step 11 B:
Push pivot bracket so that it is parallel to the back side of
tank.
Step 11 C:
Stand beam assembly on end plate with the help of another
person. Have that person hold the beam in place while maneuvering the
log splitter as shown in Step 11 D.
Tools Needed
18mm Wrench
(2 Needed)
Torque Wrench
Beam to Pivot Bracket
Flange Bolt
Qty 2
Beam to Pivot Bracket
Nyloc Nut
Qty 2
Step 11 B
Step 11 C
Step 11 A
Bolt
Nut
Pivot Mount
Bracket
End Plate
Beam
Assembly
Fasteners Needed from Parts Bag:
Summary of Contents for M110800F.4
