North Star M110800F.4, Owner'S Manual

Page: 46 / 72

46
Assembly Instructions
Fasteners Needed (Located on Tank Assembly):
.
Step 4 – Tow Bar to Tank
NOTE: Nut and bolt are installed (hand tight only) on tow bar mount
for packaging purposes. Remove nut and bolt prior to beginning this
step. They will be re-installed.

Align holes on the tow bar to the tow bar mount on the hydraulic tank
assembly.

Re-install (2) bolts and (2) nuts, and tighten with wrench.

Torque to 71 ft.-lb.
Tools Needed

18mm Wrench
(2 Needed)

Torque Wrench
Holes
Nut
Bolt
Tow Bar
Tow Bar
Mount
Tow Bar to Tank
Flange Bolt
Qty 2
Tow Bar to Tank
Nyloc Nut
Qty 2