North Star M110800F.4, Owner'S Manual, Page: 57 / 72

57
Assembly Instructions
Tools Needed

13mm Wrench
(2 Needed)

Torque Wrench
Step 14 – Throttle Cable Setup
Step 14 only applies to Models 110900 and 1131

One end of the throttle cable is connected to the engine. Route
unattached end of cable from engine downward towards engine mount
bracket. Ensure cable routes thru the hose guide.

There is (1) crimped clamp secured on the cable and (1) vinyl coated
clamp that is free moving on the cable.

Insert bolt thru the crimped clamp that attaches the cable to the engine
mount bracket. Secure with nut.
Torque to 21 ft.-lb.

Vinyl coated loop clamp will be connected to engine guard bolt in a
future step.
Fasteners Needed from Parts Bag:
Engine Throttle Clamp
to Engine Mount
Flange Bolt
Qty 1
Engine Throttle Clamp to
Engine Mount
Flange Nut
Qty 1
Hose Guide
Engine/Pump
Throttle Cable
Tow Bar
Engine Mount Bracket
Crimped Clamp
Bolt and Nut