Operating Instructions
seepex Machine
General
Dokument
document
Ausgabe
issue
Blatt
sheet
OM.GEN.01e
A / 10.12.94
1 (2)
1.
General
1.1
Application
These operating instructions contain basic infor-
mation on the installation, commissioning and
maintenance of
seepex
machines. Compliance with
the work steps described in the individual sections is
essential.
1.2
Details of the seepex machines
1.2.1
Operating Instructions
The Commission Number (comm. no) assigns the
operating instructions to a particular
seepex
machine. The operating instructions are produced in
relation to a specific job/commission and are valid
only for the machine whose comm. no. is identical
with that indicated on the cover sheet and possessing
the associated data sheet, Point 9.
1.2.2
Manufacturer
The machines were manufactured by
seepex
.
1.2.3
Range, Size, Version
of the machines are stated in the appended data sheet,
Point 9.
1.2.4
Machine Comm. No. and Year of Construction
are stated on the type plate at the machine.
1.2.5
Release Date of the Operating Instructions
is stated on the cover sheet of the operating
instructions.
1.2.6
Modifications, Notes of Modification
If modifications to the machines are
carried out in agreement with
seepex
, a new set
of operating instructions will be provided, or the
existing operating instructions will be supplemented by
an additional sheet together with a new cover sheet.
The date of modification and modification index will be
noted on the new cover sheet.
1.2.7
EEC Machine Directive
1.2.7.1
Manufacturer's Declaration
seepex
Manufacturer's Declaration as required by the
EEC Machine Directive 89/392/EEC, Appendix II B:
The
seepex
machines delivered in accordance with
our design are intended to be fitted in one machine or
assembled together with other machines to form one
machine/plant. The commissioning of the machine is
forbidden until such a time as has been established
that the entire machine/plant satisfies the requirements
of the EEC Directive for Machines as amended
91/368/EEC and 93/44/EEC.
Particular attention must be paid to the safety
requirements specified in EN809 (s and Equipment for
Fluids) as well as the information in these operating
instructions.
1.2.7.2
Declaration of Conformity
seepex
machines possessing no safety accessories
do not fulfill the requirements of the EEC Machine
Directive 89/392/EEC as amended 91/368/EEC and
93/44/EEC.
For this reason, no Declaration of Conformity as
required by the EEC Machine Directive 89/392/EEC,
Appendix IIA can be issued before appropriate safety
devices have been installed/mounted on the machine
and/or plant with due regard to the information given in
these operating instructions.
The following harmonized standards are particularly
applicable:
EN 809, EN292T1, EN292T2
Applicable national standards and specifications must
be taken into consideration.
Following assessment of the conformity of the
machine/plant with the EEC Machine Directive,
customers may on their own initiative place on the full
machine/plant the EEC symbol 'CE' as defined in
Identification Directive 93/68/EEC.
CAUTION
This documentation must be kept available for at
least 10 years.
