Nortel Web OS 10.0 Application Manual Download Page 368

Page: 368 / 482

Web OS 10.0 Application Guide

368

Chapter 14: Virtual Private Network Load Balancing

212777-A, February 2002

Test Configurations and General Topology

The switches should be able to health check each other, and all switches should see four real
servers up. (Rules on the VPN devices permit this—see

Figure 14-3 on page 368

Figure 14-3 Checkpoint Rules for Both VPN Devices as Seen in the Policy Editor

Disconnect the cables (cause failures) to change the available servers that are up.

This should change the VRRP preferences. You can view VRRP preferences using the CLI
command

/info/vrrp

Use the Checkpoint Log Viewer to watch for accepted and dropped traffic. In the tool bar
above, click on Window, then Log Viewer.

OTE

–

To help simplify the logs, the health checks are not logged.

>> # /info/slb/dump

(Verify which servers are up)

Summary of Contents for Web OS 10.0



































































































































































































































































































































































































































































































Search results

Summary of Contents for Web OS 10.0

Reviews:

Brands by name

Popular brands

Nortel Web OS 10.0, Application Manual

Search results

Summary of Contents for Web OS 10.0

Reviews:

Brands by name

Popular brands