Nortel Web OS 10.0, Application Manual

Page: 212 / 482

Web OS 10.0 Application Guide
212
n
Chapter 8: Application Redirection
212777-A, February 2002
3. Configure an RTSP redirection filter to cache data and balance the load among the cache
servers.
4. Configure a default allow filter to facilitate traffic.
5. Turn on filtering on the port and add filters to the port to support basic WCR.
6. Apply and save the configuration.
>> # /cfg/slb/filt 1 (Select the menu for filter 1)
>> Filter 1# action redir
(Set the action for redirection)
>> Filter 1# proto tcp
(Enter TCP protocol)
>> Filter 1# dport rtsp
(Enter service port for RTSP)
>> Filter 1# rport rtsp (Enter redirection port for RTSP)
>> Filter 1# group 1
(Select RTSP cache server group 1)
>> Filter 1# adv (Select advanced menu for filter 1)
>> Filter 1# Advanced# proxy disable
(Disable proxy)
>> # /cfg/slb/filt 2048
(Select a default allow filter 2048)
>> Filter 2048# sip any (From any source IP addresses)
>> Filter 2048# dip any (To any destination IP addresses)
>> Filter 2048# ena
(Enable a default allow filter)
>> Filter 2048# action allow
(Set the action to allow normal traffic)
>> # /cfg/slb/port 1
(Select the menu for port 1)
>> SLB Port 1# add 1 (Add RTSP filter 1 to port 1)
>> SLB Port 1# add 2
(Add RTSP filter 2 to port 1)
>> SLB Port 1# filt ena (Enable filtering on port 1)
>> SLB Port 1# apply
>> SLB Port 1# save