55
.
Configuring the Secure Router 4134 for
remote access
You must connect a local terminal and log on to the Secure Router 4134 to
initially configure the system.
Connecting a terminal for local access
You use the console port to initially configure the system. The following
figure shows the location of the console port on the rear panel of the
Secure Router 4134.
Figure 6
Connecting a terminal to the Secure Router 4134 console port
To access the command line interface (CLI) using the rear panel console
port, connect a terminal or a workstation that runs terminal emulation
software to the Secure Router 4134 using the console cable that ships with
the unit.
Nortel Secure Router 4134
Quick Start
NN47263-100
02.01
Standard
18 February 2008
Copyright © 2007, 2008 Nortel Networks
.
Summary of Contents for Secure Router 4134
Page 69: ......
