Installing the interface modules
39
Installing the interface modules
Install the optional interface modules in the front panel of the Secure
Router 4134 chassis.
Nortel strongly recommends that you power down the Secure Router 4134
if you are installing an interface module in a slot in which you have not
previously installed that module type. If you do not power down the router
to install a module, you must reboot the router to use the card. After a
module is installed and initialized, you can hot swap that module.
The chassis has horizontal slots for small, medium, and large interface
modules. The chassis ships with four small slots, and three medium slots.
You can adapt two of the medium slots to accommodate a large module
(which spans two medium slots). You must separately order the modules.
The following figure shows the default slot configuration and indicates how
slots are numbered on the Secure Router 4134.
Figure 2
Slot numbering on the Secure Router 4134
A slot numbering legend is printed directly above the chassis SFP Ethernet
ports (ports 0/3 and 0/4) on the front panel of the Secure Router 4134. The
legend shows how slots are numbered on the Secure Router 4134. The
following figure shows the slot numbering legend.
Nortel Secure Router 4134
Quick Start
NN47263-100
02.01
Standard
18 February 2008
Copyright © 2007, 2008 Nortel Networks
.
Summary of Contents for Secure Router 4134
Page 69: ......
