Nortel MOG6xx, Installation And Configuration Manual

Page: 87 / 120

87
Appendix B: WLAN Application Gateway 2246
Connecting through a serial port
1
Connect the WLAN Application Gateway 2246 to the serial port of a terminal or PC using a
DB-9 female, null-modem cable. See
Figure 19 .
Figure 19 Cable to port connection
2
Run a terminal emulation program (such as HyperTerminal™), or use a VT-100 terminal with
the following configuration:
— Bits per second: 9600
— Data bits: 8
— Parity: None
— Stop bits: 1
— Flow control: None
3
Reset the system.
The following appears on the terminal:
04830130
4
Type the following command using the terminal or PC keyboard:
0255CC [CTRL M] [CTRL J]
The command does not display on the screen as it is typed.
The login screen appears. If an error was made when entering the command string, the
message “
Ill Formed Packet ” appears. It appears as a series of numbers followed by some
form of the typed command. If this occurs, repeat Step 3 and Step 4.
Note:
If using Windows 2000, Service Pack 2 must be installed to enable the use of
HyperTerminal™.
RS-232
port
LAN
Ethernet
switch
RS-232
port
WLAN Application
Gateway 2246
Terminal or PC