29
Figure 11 Installing a GBIC
3
Press on the front of the GBIC until it snaps into place.
4
Remove the rubber plug to connect cables.
Removing an Installed GBIC from an MDA
For a description of the GBIC MDA, see
“GBIC MDA” on
page 22
.
To remove an installed GBIC:
•
If the GBIC has spring tabs (
Figure 9 on page 23
), press in
on the tabs on each side of the GBIC as you pull the GBIC
out of the MDA’s Host port (
Figure 12
).
Do one of the following:
