Nortel Business Communications Manager 2.5, Programming Manual

Page: 103 / 152

Chapter 12 System features 103
Telephone Features Programming Guide
Each schedule can have its configuration of a service which works separately from automatic start
and stop times. For example, in Restriction service, the Night schedule prevents people from
making long distance calls. Calling the restriction Night schedule does not limit the use to that
specific schedule. You can turn the Night schedule for Restriction service on or off as needed any
time of the day or night. If you decide to run a service on a schedule, the system uses the start and
stop times used for the schedule you set up.
Turn services on and off using feature codes
You can access the master control for services through the Unified Manager. The following feature
codes allow access and control of the day-to-day use of services.
To turn a service on:
1 Enter the appropriate feature code from a control telephone.
2
Press
NEXT
to move through the schedules until the display shows the version of the service
you want turned on.
3
Press
OK
to select the setting, or press
QUIT
to exit the feature without making any changes.
To turn a service off, enter the appropriate feature code from a control telephone.
View active services from a two-line display telephone
When a service is active, the control telephone display shows
Services ON
.
1
Press
LIST
. The display shows the first active service and the schedule in use.
2 If there are several active services, press
NEXT
to view all of the services.
3
Press
EXIT
to exit the feature.
≤°‡⁄
Turns on Ringing service. When used at the direct dial telephone,
it activates the alternate direct dial telephone (extra dial
telephone).
≤£°‡⁄
Turns off Ringing service.
≤°‡¤
Turns on Restriction service.
≤£°‡¤
Turns off Restriction service.
≤°‡‹
Turns on Routing service.
≤£°‡‹
Turns off Routing service.
Caution:
Assigning a service as Normal is not the same as canceling a service
using a feature code. If you assign the service as Normal, the normal version of a
service overrides any automatic schedule and remains until you manually cancel
it. When you cancel service by feature code, you return to the automatic schedule.