Nortel Business Communications Manager 2.5, Programming Manual, Page: 60 / 152

60 Chapter 5 Handling calls
P0937240 02
Your installer programs both the Call Park prefix and the delay before parked calls return to the
originating telephone. External calls parked for longer than the programmed delay return to your
telephone.
Park a call
You can interrupt a call to retrieve it from any telephone in your system.
1
Press
≤‡›
.
2 Press
PAGE
to announce the retrieval code on your telephone display.
Retrieve a parked call
1
Select an internal line. (On the T7100 telephone, pick up the handset.)
2
Dial the Call Park retrieval code.
Your system installer can disable Call Park.
The person you were talking to has parked your call. You cannot
park the same call.
You have tried to use Call Park with no active call on your
telephone. If the call you want to park is on hold, reconnect to
the call before you park it.
You have entered an invalid retrieval code.
There was no call on the retrieval code you entered.
You have tried to park a conference call. Split the conference
and park the calls separately. The person who retrieves the calls
can reconnect the conference.
Record the code shown. Use Page (
≤fl‚
) or press
PAGE
to
announce the call and its retrieval code.
All available retrieval codes are in use. Transfer the call or take
a message instead.
For other displays, see Appendix B, “Common display prompts and error messages,” on
page 137 .
Already parked
No call to park
Invalid number
No call on: 101
Park denied
Parked on: 402
PAGE EXIT
Parking full