manualshive.com logo in svg

Nortel BayStack 380, Using Manual, Page: 85 / 218

Share
Download
Nortel BayStack 380 Using Manual Download Page 85

Chapter 2 Network configuration

85

Using the BayStack 380 10/100/1000 Switch

Figure 38

 shows the MultiLink Trunk Configuration screen for Switch S4.

Figure 38   MultiLink Trunk Configuration screen for Switch S4

Switch S4 is configured as follows:

•

Trunk (read only) indicates the trunk (1 to 6) that corresponds to the switch 
ports specified in the Trunk Members fields.

•

Trunk Members indicates the ports that can be configured, in each row, to 
create the corresponding trunk. 

— Ports 15 and 19 are assigned as trunk members of trunk T5.

•

STP Learning indicates the spanning tree participation setting for each of the 
trunks. Trunk 1 is enabled for Normal STP Learning.

•

Trunk Mode (read only) indicates the Trunk Mode for each of the trunks. The 
Trunk Mode field value for trunk 1 is set to Basic. Source MAC addresses are 
statically assigned to specific trunk members for flooding and forwarding, 
which allows the switch to stabilize and distribute the data streams of source 
addresses across the trunk members.

•

Trunk Status indicates the Trunk Status for each of the trunks. When it is set 
to Enabled, the configuration settings for that specific trunk are activated.

•

Trunk Name indicates optional fields for assigning names to the 
corresponding configured trunks.

Summary of Contents for BayStack 380



























































































































































































































Reviews:

No comments