manualshive.com logo in svg

Nortel BayStack 380, Using Manual, Page: 131 / 218

Share
Download
Nortel BayStack 380 Using Manual Download Page 131

Chapter 3 Using the console interface

131

Using the BayStack 380 10/100/1000 Switch

Port Configuration screen

The Port Configuration screen (Figures 

63

 and 

64

) allows you to configure 

specific switch ports or all switch ports. You can enable or disable the port status 
of specified switch ports, set the switch ports to autonegotiate for the highest 
available speed of the connected station, or set the speed for selected switch ports 
(autonegotiation is not supported on fiber optic ports).

You can disable switch ports that are trunk members; however, the screen prompts 
for verification of the request before completing the action. Choosing [Yes] 
disables the port and removes it from the trunk.

To open the Port Configuration screen:

Figure 63   Port Configuration screen (1 of 2)

Note: 

The Autonegotiation fields, the Speed fields, and the Duplex 

fields are independent of MultiLink Trunking, VLANs, and the STP.

Choose Port Configuration (or press p) from the Switch Configuration Menu 
screen.

Summary of Contents for BayStack 380



























































































































































































































Reviews:

No comments