manualshive.com logo in svg

Nortel BayStack 380, Using Manual, Page: 22 / 218

Share
Download
Nortel BayStack 380 Using Manual Download Page 22

22

Preface

212859-A

Related publications

For more information about using the BayStack 380 Switch, refer to the following 
publications:

•

Using the BayStack 380 10/100/1000 Switch (part number 212859-A)

Describes how to use the BayStack 380 10/100/1000 Switch for network 
configuration.

•

Using Web-Based Management for the BayStack 380 10/100/1000 Switch 
(part number 212863-A)

Describes how to use the Web-based management tool to configure switch 
features.

•

Installing the BayStack 380 10/100/1000 Switch (part number 212860-A)

Describes how to install the BayStack 380 Switch.

•

Release Notes for the BayStack 380 10/100/1000 Switch 
(part number 212864-A)

Documents important changes about the software and hardware that are not 
covered in other related publications.

•

Getting Started with the BayStack 380 Management Software 
(part number 212861-A)

Describes how to install the Java-based device level software management 
application.

•

Reference for the BayStack 380 Management Software (part number 212862)

Describes how to use the Java-based device level software management 
application.

You can print selected technical manuals and release notes free, directly from the 
Internet. Go to the

 www.nortelnetworks.com/documentation

 URL. Find the 

product for which you need documentation. Then locate the specific category and 
model or version for your hardware or software product. Use Adobe* Acrobat 
Reader* to open the manuals and release notes, search for the sections you need, 
and print them on most standard printers. Go to Adobe Systems at the

 

www.adobe.com 

URL to download a free copy of the Adobe Acrobat Reader.

Summary of Contents for BayStack 380



























































































































































































































Reviews:

No comments