manualshive.com logo in svg

Nortel BayStack 380, Using Manual, Page: 82 / 218

Share
Download
Nortel BayStack 380 Using Manual Download Page 82

82

Chapter 2 Network configuration

212859-A

Figure 36

 shows the MultiLink Trunk Configuration screen for Switch S2.

Figure 36   MultiLink Trunk Configuration screen for Switch S2

Switch S2 is configured as follows:

•

Trunk (read only) indicates the trunks (1 to 6) that correspond to the switch 
ports specified in the Trunk Members fields.

•

Trunk Members indicates the ports that can be configured, in each row, to 
create the corresponding trunk:

— Ports 11 and 13 are assigned as trunk members of trunk 1.

•

STP Learning indicates the spanning tree participation setting for each of the 
trunks. Trunks 1 and 2 are enabled for Normal STP Learning.

•

Trunk Mode (read only) indicates the Trunk Mode for each of the trunks. The 
Trunk Mode field values for trunks 1 and 2 are set to Basic. Source MAC 
addresses are statically assigned to specific trunk members for flooding and 
forwarding, which allows the switch to stabilize and distribute the data 
streams of source addresses across the trunk members.

•

Trunk Status indicates the Trunk Status for each of the trunks. When set to 
Enabled, the configuration settings for that specific trunk are activated.

Summary of Contents for BayStack 380



























































































































































































































Reviews:

No comments