Nortel BayStack 100-S, User Manual

Page: 35 / 80

Chapter 3 Instant Internet 100-S hardware installation 35
Setting Up the BayStack Instant Internet 100-S Unit
Figure 2 illustrates the rear panel of the unit.
Figure 2 Rear panel of the Instant Internet 100-S unit
Note: If you have a triple-Ethernet unit, the third Ethernet connection
replaces the phone jack or ISDN jack at the top of the unit.
Warning: The Instant Internet unit contains a lithium battery. There is
a danger of explosion if the battery is replaced incorrectly. The battery
should be replaced only by factory authorized personnel.
Option card
(to telco or
Ethernet device)
Eth2 connection
(to router
or bridge)
Power
switch
Fan
Configuration
switches
Power supply
connector
Power voltage
selector switch
9859EB
Aux Configure Ethernet
10/100
115 / 230 V ~
50 / 60 Hz , 4A / 2A
230VAC
115VAC
AUX port
(to PC
or modem)
Link Act