315396-F
22
Installing the Switch
The following section outlines the procedures necessary for physically installing the switch.
Rack-Mounting the Switch
Application Switches have models that support either AC or DC power. The following procedure
describes the rack-mounting process for both types of units:
1
Connect the two mounting brackets to the switch using the supplied screws. Mounting
brackets can be attached at mid-mount position or faceplate mount depending upon the
required configuration.
Figure 12
Mounting Brackets for E and DC variants of the Nortel Application Switch
1
Caution:
Always observe the precautions outlined in the manuals for this and all other
equipment you are installing (see
“Installation Preparation” on page 21
).
