Connecting AC power
39
DANGER
Use only power cords that have a grounding path. Without a
proper ground, a person who touches the switch is in danger of
receiving an electrical shock. Lack of a grounding path to the
switch can result in excessive emissions. For a translation of this
statement, see
"Translations of safety messages" (page 65)
.
Connecting power to the back panel
Connect the AC power cord to the back of the switch and then connect the
cord to an AC power outlet.
"Connecting AC power to the back panel" (page
39)
illustrates connecting the AC power cord to the switch back panel.
ATTENTION
The Nortel Ethernet Routing Switch 4500 Series has no AC power switch. When
you connect the power cord to a suitable, energized AC power outlet, the switch
powers up immediately.
Connecting AC power to the back panel
Nortel Ethernet Routing Switch 4500 Series
Installation Guide
NN47205-300 (322811-B)
03.01
Standard
5.1
19 November 2007
Copyright © 2007, Nortel Networks
.
