26
Installing the Nortel Ethernet Routing Switch
Installation of SFP transceivers
This section describes how to install SFP transceivers.
To install SFP transceivers, perform the following procedure.
Step
Action
1
Remove the transceiver from the protective packaging.
2
Verify that the transceiver is the correct model for the network
configuration.
3
Grasp the transceiver between your thumb and forefinger.
4
Insert the transceiver into the proper module on the switch. Apply a
light pressure to the transceiver until it clicks and locks into position
in the module.
Transceiver insertion
5
Remove the dust cover from the transceiver optical bores.
—End—
Nortel Ethernet Routing Switch 4500 Series
Installation Guide
NN47205-300 (322811-B)
03.01
Standard
5.1
19 November 2007
Copyright © 2007, Nortel Networks
.
