64
Installing the Nortel Ethernet Routing Switch
ATTENTION
You must enter a ’.’ on a line by itself to end recording of NUQC commands. The $
sign must be used as a wildcard when specifying unit numbers as a part of any
comment which uses port numbers. When NUQC executes the commands, the $
sign is effectively replaced by the unit number of the unit to which NUQC is being
applied. If a new unit in a stack is added to the stack, then all the commands that
are recorded are executed on the new unit.
Nortel Ethernet Routing Switch 4500 Series
Installation Guide
NN47205-300 (322811-B)
03.01
Standard
5.1
19 November 2007
Copyright © 2007, Nortel Networks
.