Nortel 2700, Installation Manual

Page: 72 / 108

72
Chapter 4 Installing option cards and DIMMs
NN46110-311 02.01
Figure 26
Installing and removing a DIMM
10 Replace the top cover on the chassis ( Figure 21 on page 62 ).
a Hold the cover at an angle, and slide it onto the chassis.
b Insert the four screws that secure the cover to the chassis, and use a
screwdriver to tighten the screws.
11
Do the following to install the VPN Router 2700 in an equipment rack:
a Set the VPN Router 2700 on the rack-mount shelf in the rack.
b Insert one of the panhead screws through the bottom hole on each side of
the shelf into the hole in the rack and tighten the screws.
To remove DIMMs, p u ll back
locking levers and p u ll o u t DIMM.
To install DIMMs, p u ll back locking
levers and p u sh in DIMM.
Locking lever
Alignment keys