Nortel 2700, Installation Manual

Page: 69 / 108

Chapter 4 Installing option cards and DIMMs
69
Nortel VPN Router Installation — VPN Router 2700
b Insert the four screws that secure the cover to the chassis, and use a
screwdriver to tighten them.
10 Do the following to mount the VPN Router 2700 in an equipment rack:
a Set the VPN Router 2700 on the rack-mount shelf in the rack.
b
Insert one of the panhead screws through the bottom hole on each side of
the shelf into the hole in the rack, and tighten the screws.
11 Replace the front bezel (Figure 25) .
a Hold the bezel by the two handles, and push it onto the chassis.
b Use a screwdriver to tighten the two screws that secure the bezel to the
chassis.
Figure 25
Replacing the front bezel
CS260005B
Press here