Nortel 222, User Manual, Page: 61 / 349

Chapter 3 WAN and Dial Backup Setup 61
Nortel Business Secure Router 222 Configuration — Advanced
Authen This field sets the authentication protocol used for
outgoing calls.
Options for this field are:
CHAP / PAP - Your Business Secure Router will accept
either CHAP or PAP when requested by this remote
node.
CHAP - accept CHAP only.
PAP - accept PAP only.
CHAP/PAP
Pri Phone #
Sec Phone #
Enter the first (primary) phone number from the ISP for
this remote node. If the Primary Phone number is busy
or does not answer, your Business Secure Router dials
the Secondary Phone number, if available. Some areas
require dialing the pound sign # before the phone
number for local calls. Include a # symbol at the
beginning of the phone numbers as required.
Edit PPP
Options Move the cursor to this field and use the space bar to
select [Yes] and press [Enter] to edit the PPP options for
this remote node. This brings you to
Menu 11.2.1 -
Remote Node PPP Options (See “Editing PPP options”
on page 62 ).
No
(default)
Rem IP Addr Leave the field set to 0.0.0.0 (default) if the remote
gateway has a dynamic IP address. Enter the remote
gateway’s IP address here if it is static. 0.0.0.0
(default)
Edit IP This field leads to a “hidden” menu. Press [SPACE BAR]
to select
Yes and press [ENTER] to go to Menu 11.2.2 -
Remote Node Network Layer Options . See “Editing
TCP/IP options” on page 63 for more information.
No
(default)
Edit Script
Options Press [SPACE BAR] to select Yes and press [ENTER] to
edit the AT script for the dial backup remote node ( Menu
11.2.3 - Remote Node Script ). See “Editing logon
script” on page 66 for more information.
No
(default)
Telco Option
Allocated
Budget Enter the maximum number of minutes that this remote
node can be called within the time period configured in
the
Period field. The default for this field is 0, meaning
there is no budget control and no time limit for accessing
this remote node.
0
(default)
Period(hr) Enter the time period (in hours) for how often the budget
should be reset. For example, to allow calls to this
remote node for a maximum of 10 minutes every hour,
set the
Allocated Budget to 10 (minutes) and the
Period to 1 (hour).
0
(default)
Table 9 Fields in menu 11.2 remote node profile (Backup ISP)
Field Description Example