manualshive.com logo in svg

Nortel 222, User Manual, Page: 196 / 349

Share
Download
Nortel 222 User Manual Download Page 196

196

Chapter 15 Firmware and configuration file maintenance

NN47922-501

Figure 107   

Menu 24.7.2 as seen using the Console Port 

2

After the "Starting Xmodem upload" message appears, activate the Xmodem 
protocol on your computer. Follow the procedure in 

“Uploading Xmodem 

firmware using HyperTerminal” on page 195

. The procedure for other serial 

communications programs is similar.

3

Enter 

atgo

 to restart the Business Secure Router.

Menu 24.7.2 - System Maintenance - Upload System Configuration File

          

          To upload system configuration file:

          1. Enter "y" at the prompt below to go into debug mode.

          2. Enter "atlc" after "Enter Debug Mode" message.

          3. Wait for "Starting XMODEM upload" message before activating

             Xmodem upload on your terminal.

          4. After successful firmware upload, enter "atgo" to restart the

             system.

          Warning:

          1. Proceeding with the upload will erase the current

             configuration file.

          2. The system’s console port speed (Menu 24.2.2) may change

             when it is restarted; please adjust your terminal's speed

             accordingly. The password may change (menu 23), also.

          3. When uploading the DEFAULT configuration file, the console

             port speed will be reset to 9600 bps and the password to

             "setup".

Do You Wish To Proceed:(Y/N)

Summary of Contents for 222






























































































































































































































































































































































Reviews:

No comments