manualshive.com logo in svg

Nortel 222, User Manual, Page: 201 / 349

Share
Download
Nortel 222 User Manual Download Page 201

Chapter 16 System Maintenance menus 8 to 10

201

Nortel Business Secure Router 222 Configuration — Advanced

means that you must specify the type of netbios filter and whether to turn it on or 
off.

Command usage

A list of commands can be found by typing help or ? at the command prompt. 
Always type the full command. Type exit to return to the SMT main menu when 
finished.

Figure 110   

Valid commands 

ras> ?

Valid commands are:

sys             exit            ether           ip

ipsec           bm              certificates    radius 

8021x

Table 48   

Valid commands

Command

Description

sys

The system commands display device information and configure device 
settings.

exit

This command returns you to the SMT main menu.

ether

This commands display Ethernet information and configure Ethernet 
settings.

ip

This commands display IP information and configure IP settings.

ipsec

This commands display IPSec information and configure IPSec settings.

bm 

This commands display bandwidth management information and 
configure bandwidth management settings.

certificates

This commands display certificate information and configure certificate 
settings.

radius 

This commands display RADIUS information.

8021x

This commands display IEEE 802.1x information.

Summary of Contents for 222






























































































































































































































































































































































Reviews:

No comments