manualshive.com logo in svg

Nortel 222, User Manual, Page: 278 / 349

Share
Download
Nortel 222 User Manual Download Page 278

278

Appendix H Command Interpreter

NN47922-501

udp

Sends the trace packets to another 
system using UDP.

udp switch

 [on|off]

Enables or disables the sending of the 
trace packets to another system using 
UDP or displays the current setting.

udp addr

 <addr>

Sets the target IP address for sending 
trace packets using UDP.

udp port

 <port>

Sets the UDP port (should match that 
of the target IP address) for sending 
trace packets using UDP.

parse [[start_idx], 

end_idx]

Displays detailed packet details of the 
packet range specified.

brief

Displays a brief listing of packet 
contents.

version

Displays the RAS code and driver 
versions.

view

<filename>

Displays the specified text file.

wdog

switch

[on|off]

Turns the watchdog firmware 
protection feature on or off.

cnt

[value]

Sets (0-34 463) or displays the current 
watchdog count (in 1.6 sec units).

romreset

Restores the factory default 
configuration file.

server  

 

Use these commands to configure 
remote server management.

  

access 

<telnet|ftp|web|icmp|snmp|

dns> <value> 

Sets the server access type.

  

load 

Loads server information. 

  

disp 

Displays server information.

  

port <telnet|ftp|web|snmp> 

<port> 

Sets the server port.

  

save 

Saves server information.

  

secureip <telnet|ftp| 

web|icmp|snmp|dns> <ip> 

Sets server secure IP address.

Table 69   

Sys commands

Command

Description

Summary of Contents for 222






























































































































































































































































































































































Reviews:

No comments