GC2e Wireless Security System | Installation and Programming Guide
©2020 Nortek Security & Control LLC. All rights reserved.
56
2GIG is a registered trademark of Nortek Security & Control LLC.
Control Panel Programming
Q76: Force Bypass Reports (0-1)
DEFAULT: (0) Disabled
The system can report which sensors have been force bypassed by
the user when the system is armed . Forced bypassed sensors are
always recorded in the event log, regardless of the setting of this
programming question.
• The default setting (0) Disabled prevents reporting forced
bypassed sensors .
• To report forced bypassed sensors, select (1) Enabled .
Q77: Event Log (0-3)
DEFAULT: (3) All Events
To control the amount of event log entries, the events that get
recorded into the system’s event log can be selected by type . This
setting filters the events that populate the event log.
• The default setting (3) All Events records all events in the
event log .
• To choose different options, select one of these filters:
Q82: Z-Wave Door Locks Feature (0-1)
DEFAULT: (1) Enabled
Display of the Home Service’s
Door Locks button can be enabled or
disabled. This programming question only functions if the Z-Wave
feature enable question Q79: Z‐ Wave Feature is set to (2) or (3) .
• The default setting (1) Enabled shows the Door Locks button.
• To hide the Door Locks button, select (0) Disabled .
Q83: Select Temperature Display Units (0-1)
DEFAULT: (0) Degrees
Fahrenheit
The Home Service’s Z-Wave thermostat display screens can show
the temperature in degrees Fahrenheit or degrees Celsius .
NOTE: This programming question only functions if Q79: Z- Wave
Feature is set to (2) or (3) and Q81: Z-Wave Thermostats Feature
is set to (1) Enabled .
• The default setting is (0) Degrees Fahrenheit .
• To change the setting, select (1) Celsius .
NOTE: The setting you select here also changes the display units
shown on the weather forecast on the Control Panel’s Home screen .
Q84: Services Require Master Code (0 to 1)
DEFAULT: (0) Disabled
The
Services button can be configured to require the use of the
master user code to access Services .
• The default setting (0) Disabled overrides the requirement to
enter a master user code to access the
Services menu .
To require the use of the master user code to access the
Services
menu, select (1) Enabled.
When enabled then the master user code is required to access
the Services and the Z-Wave device configurations. This keeps
unauthorized users from being able to change Z- Wave settings,
such as temperature, lights and locks .
Q85: Master User Access to Z-Wave Toolbox
(0-1)
DEFAULT: (0) Disabled
The Z-Wave Toolbox menu can be set to require the use of the
master user code or the installer code . By default, the installer
code is required for users to access the Z-Wave Toolbox.
• The default setting (0) Disabled requires users to enter the
installer code to access the Z-Wave Toolbox menu and all of
its features, including the Advanced Toolbox .
• To require the use of the master user code or the installer
code to access the Z-Wave Toolbox menu, select (1) Enabled .
NOTE: When (1) Enabled, the Installer code will still be required
to access the Advanced Toolbox menu . This prevents end users
from adding or removing Z-Wave devices.
Q86: Disable Siren After Two-Way Audio (0-1)
DEFAULT: (0) Disabled
This setting enhances system operation in personal emergency
applications and also provides the dealer with the option of the
siren sounding until the bell cut off or to the end of a two-way-
voice session .
• The default setting (0) Disabled will cause the siren to resume
after two-way audio (if the bell cut off timer has not expired).
• (1) Enabled will cause the siren to shut off after a two-way
audio session .
Q80: Z-Wave Switches Feature (0 to 1)
DEFAULT: (1) Enabled
Display of the Home Service’s
Switches button can be enabled or
disabled .
NOTE: This programming question only functions if Q79: Z- Wave
Feature is set to (2) or (3) .
• The default setting (1) Enabled shows the
Switches button.
• To hide the Switches button, select (0) Disabled .
Q81: Z-Wave Thermostats Feature (0 to 1)
DEFAULT: (1) Enabled
Show or hide the Home Service’s Thermostats button on the
Control Panel .
NOTE: This programming question only functions if Q79: Z- Wave
Feature is set to (2) or (3) .
• The default setting (1) Enabled shows the
Thermostats button.
• To hide the Thermostats button, select (0) Disabled .
Event Log Filters
(0) Disabled (no events logged)
(1) All Events Except Open, Closing, and Bypass
(2) All Events Except Open and Closing
(3) All Events
Q79: Z-Wave Feature (0-3)
DEFAULT: (3)
(3) Enabled on Panel; Rules Disabled, Remote Access Enabled
The Z-Wave home services feature can be enabled or disabled with
various remote control access options.
• The default setting (3) Enabled on Panel; Rules Disabled,
Remote Access Enabled displays the
Services button, but will
show a message that the feature is currently disabled and the
user should call the installer .
• To hide the
Services button, select (0) Disabled and Hidden .
• To show the
Services button but disable it from use, select (1)
Disabled but Visible .
• To show the
Services button and disable off- site remote
control, select (2) Enabled on Panel, Remote Access Disabled .
Summary of Contents for 2GIG eSeries GC2e
Page 2: ......
