6
TS571W Installation Instructions
TS571W Installation Instructions
7
T
L
L
V
P
S
S
N
N
T
L
L
V
P
N
S
S
N
●
Secure the gate bracket with the
supplied hardware as shown.
●
Once the gate post and gate
brackets are installed, reattached
the operator arm.
●
Ensure the operator arm is level,
adjusting the post bracket location
if necessary.
●
Once level, ensure all hardware is
tight.
●
Remove excess bolt length with a
hacksaw.
H
1
2
1
Fence Post: MM371W
Leading Edge of
Second Gate: MM372W
H
1
2
1
Fence Post
●
Remove the operator from the
gate post and gate brackets.
●
With the gate fully open, install
the closed position stop plate
(hardware not included).
●
Do not fully tighten hardware
until after the next step.
●
Swing the gate to the closed
position, and adjust the closed
position stop plate against the
fence post.
●
Tighten the mounting hardware.
●
Return the gate to the open
position and reinstall the operator
arm.
●
To complete the pull-to-open
installation, proceed to
INSTALLING THE CLOSED POSITION STOP PLATE / PULL-TO-OPEN
Step 10
Step 1
Step 11
Step 2
PULL-TO-OPEN OPERATOR MOUNTING
Your Property
Your Property
