background image

56

57

Onder voorbehoud van wijzigingen en (druk)fouten!

 

GEBRUIKSAANWIJZING 

NORSUP

WWW.NORSUP.EU 

Onder voorbehoud van wijzigingen en (druk)fouten!

ZOUT ELECTROLYSER TYPE OCEANCLEAR LS

ZOUT ELECTROLYSER TYPE OCEANCLEAR LS

DE

EN

NL

FR

DK

SE

4. GARANTIE

Zorg dat u het volgende bij de hand heeft voordat u 

contact opneemt met uw verkoper :

- uw aankoopbon.

- het serienummer van het elektronicakastje.

- de installatiedatum van de apparatuur.

-  De parameters van uw zwembad (zoutgehalte, pH, 

chloor, watertemperatuur, stabilisatorgehalte, volume 

van het zwembad, dagelijkse filtratietijd...).

Wij hebben deze installatie vervaardigd met de uiterste 

zorg en al onze technische ervaring. Het is aan kwaliteits- 

controles onderworpen. Mocht u ondanks alle zorg en 

kennis tijdens de productie een beroep moeten doen 

op onze garantie, dan dekt deze uitsluitend de kosteloze 

vervanging van defecte onderdelen van onze installatie 

(exclusief verzendkosten heen en retour).

Duur van de garantie (op basis van de originele 

aankoopbon)

Elektronicakastje : 2 jaar.

Cel :   

-  minimaal 1 jaar buiten de Europese Unie 

(exclusief een verlengde garantie).

 

 

-  Minimaal 2 jaar in de Europese Unie 

(exclusief verlengde garantie).

Sondes : afhankelijk van het model.

Reparaties en reserveonderdelen : 3 maanden.

De bovenstaande periodes zijn voor standaard 

garanties. Echter, deze kunnen verschillen per land van 

installatie en per distributiesysteem.

De garantie

De garantie is van toepassing op alle onderdelen, met 

uitzondering van gebruiksonderdelen die regelmatig 

vervangen moeten worden. De installatie is gegaran-

deerd tegen alle productiegebreken bij normaal gebruik.

Klantenservice

Alle reparaties worden uitgevoerd bij de fabrikant. 

Vervoerskosten naar en van de fabrikant zijn voor 

rekening van de gebruiker. Stilvallen en verlies van 

gebruik van een apparaat als gevolg van een 

eventuele reparatie geeft in geen geval aanleiding 

tot schade-vergoeding. Verplaatsing van materiaal 

gebeurt altijd op risico van de gebruiker. Het is aan 

deze laatste om bij levering te controleren dat alles in 

goede orde is en wanneer nodig voorbehoud aan te 

tekenen op de transportbon van de vervoerder. 

Bevestig binnen 72 uur per aangetekende brief met 

ontvangstbewijs bij de vervoerder.

Vervanging onder garantie leidt in geen geval tot 

verlenging van de oorspronkelijke garantietermijn.

Toepassingsbeperking van de garantie

Om de kwaliteit van deze producten te verbeteren, 

behoudt de fabrikant zich het recht voor de productie-

kenmerken, op ieder moment en zonder kennisgeving, 

te wijzigen. Deze documentatie is uitsluitend bedoeld 

voor informatieve doeleinden en heeft geen contract-

uele verplichting ten aanzien van derde partijen. De 

fabrieksgarantie, die fabricagefouten dekt, dient niet 

verward te worden met de in deze documentatie 

beschreven handelingen. Installatie, onderhoud en, 

meer in het algemeen, alle soorten ingrepen op pro-

ducten van de fabrikant mogen uitsluitend door experts 

worden uitgevoerd. Deze ingrepen moeten bovendien 

worden uitgevoerd overeenkomstig de normen die 

gelden in het land van installatie op de dag van installatie. 

Bij gebruik van een onderdeel dat niet origineel is, vervalt 

ipso facto de garantie op de gehele installatie.

Het volgende valt niet onder de garantie :

-  De apparatuur en arbeid geleverd door derden 

tijdens installatie van het materiaal.

- Schade veroorzaakt door niet-conforme installatie.

-  Problemen veroorzaakt door wijziging, ongeluk, 

verkeerd gebruik, nalatigheid door de expert of de 

eindgebruiker, ongeautoriseerde reparaties, brand, 

overstroming, blikseminslag, bevriezing, gewapende 

conflicten en alle andere vormen van overmacht.

Deze garantie dekt in geen geval materiaal beschadigd 

als gevolg van het niet opvolgen van de voorschriften 

voor veiligheid, installatie, gebruik en onderhoud 

vastgelegd in deze documentatie. Ieder jaar verbeteren 

wij onze producten en programma‘s. Deze nieuwe 

versies zijn compatibel met de vorige modellen. De 

nieuwe versies apparatuur en programma‘s kunnen 

niet onder garantie op voorgaande modellen worden 

geïnstalleerd.

Uitvoering van de garantie

Neem voor meer informatie over deze garantie contact 

op met uw expert of met onze Klantenservice. Elk 

verzoek dient vergezeld te gaan van een kopie van de 

aankoopbon.

Wetten en geschillen

Deze garantie valt onder het Frans recht en alle 

Europese richtlijnen en internationale verdragen die 

van kracht zijn op het moment van de klacht en van 

toepassing in Frankrijk. In geval van een geschil over de 

interpretatie of de uitvoering ervan wordt een beroep 

gedaan op het civiele gerechtshof (TGI) van Montpellier 

(Frankrijk).

NOTITIES

Summary of Contents for 7033746


























































Reviews: