62 / Programming
Modular ICS 5.0 Companion Installer Guide
P0941568 01
Cells
Cell programming allows you to examine the cell radio and
cell neighbor configuration. Choose the cell you want to
examine by pressing
and the cell number (01 to 32)
or select
LIST
to see all in sequence. When in the list mode,
there is a softkey that allows you to
FIND
a specific cell
number.
From a specific cell number
,
select
to see all Cell
radios, Cell neighbors and Cell radio neighbors.
Cell radios
This sub-heading allows you to view the five-digit number of
any radios assigned to this cell.
For example, if radio 07012 is in the cell, the display shows
07012 asgned
. Press
and enter the five-digit
radio number to view the setting: Assigned or Unassigned.
Select
LIST
to see all in sequence. Select
SCAN
to go to the list
or next radio with a setting
Assigned
.
Cell nghbrs
This sub-heading allows you to view the two-digit number of
any cells that border a particular cell in a system. You can then
remove any of them or add more cells. Press
and
enter the cell number to see the settings: Assigned or
Unassigned. Select
LIST
to see each neighbor in sequence.
Select
SCAN
to see the first/next cell
Assigned
.
For example cell 01, the display shows
Nghbr:03
and
Nghbr:04
. This means that cells 03 and 04 have been assigned
as cell neighbors.
