5
Visit us at:
www.rapala.ca
Operator's Manual
Cruzer M1
Flip-Style Sled Shelter
www.facebook.com/rapalaarmy
5. Attach chair back mount left (11312) to the chair support
frame (11300) using (2) 1/4-20 x 2” bolts, (2) 1/4-20 nyloc nuts
and (2) 1/4“ washers.
SEE FIGURE 4
Note: To determine the chair back mount left (11312) from
the chair back mount right (11313) reference the welded
rod brace in the corner of the chair back mounts. When
assembled the rod brace will be to the outside of the seat
frame. SEE FIGURE 4
6. Repeat step 5 on the opposite side using right chair back
mount (11313).
SEE FIGURE 4
7. Attach the chair back frame (11288) to both left and right
chair back mounts (11312) and (11313) using (2) 1/4-20 x 2”
bolts, (2) 1/4-20 nyloc nuts, (2) 1/4” washers and (2) 5/16” black
nylon washers.
SEE FIGURE 4
Note: When assembling this step remember to place a nylon
washer between chair back frame and both left and right
chair back mounts.
8. Attach assembly table (11331) to both chair support
frames (11300) using (2) 1/4-20 x 1-1/4” bolts and (2)
1/4” washers. Locate the mounting holes for the table on
the support frames. From under the chair support insert
bolts up through the tubing to mount the table. The holes
in the table have threads that will allow the table to tighten
down to the frame.
SEE FIGURE 5
9. Attach seat base (11303) and the assembly chair seat
cushion (11330) to both chair support frame (11300) using
(4) 1/4-20 x 2-1/4” bolts and (4) 1/4” washers.
SEE FIGURE 5
Note: When assembling the seat base and seat cushion to
the chair support frame insert bolts from under the chair
support frames up through the tubing, seat base and into
the cushion. The holes in the seat base have threads that will
allow the seat base to tighten down to the frame.
10. Tighten all hardware used to complete this portion of
assembly instructions.
chair support
frame
chair vertical support
chair back
mount right
chair back support
washer
1/4-20 x 2” bolt
1/4-20 nyloc nut
chair back
mount left
chair back frame
chair support
frame
table
1/4-20 x 2-1/4” bolt
seat base
assembly chair
seat cushion
FIGURE 4
FIGURE 5
1/4-20 x 1-1/4” bolt
