73
Copyright © 1990-2011 Norman ASA
Norman Network Protection
Administrator Guide
Appendix B: Using theNetwork Protection console | Command line configuration
:> cluster set configuration value
:> cluster set help
Cluster configuration parameters are:
Parameter:
Type:
Description:
auto_failback
Boolean
When set to true, the node with highest priority will
automatically be promoted as cluster master when it
reappears after a failure.
initial_grace_time
Integer
Number of seconds a node will wait for a master to
appear on startup/enabling.
multicast_address
IP address
Multicast address nodes in the cluster communicate
on.
multicast_port
Integer
Port nodes in the cluster communicate on.
name
String
Name of the cluster.
node_id
Integer
ID of the node. This must be unique between all
nodes in a cluster.
node_priority
Integer
0 for auto, 1 for secondary, 2 for primary.
ping_timeout
Integer
How long a node will wait before it times out.
secret
Integer
“Password”. This must be the same on all nodes in a
cluster.
sync_timeout
Integer
Number of seconds a node will wait for a configura-
tion/state sync to complete. If synchronization times
out it will be retried.
cluster unbind
Unbinds the network interface used for cluster data replication.
:>cluster unbind eth1
CMD:0 CON:0 0 20100716121721 Unbound adapter [idx:3]
Using port mirror mode
Bind ethx mirror (where x is the interface number)
Bind the selected network interface in mirror port mode.
The operation mode will automatically switch to log only mode and cannot be changed until mirror port
mode has been disabled.
Unbind ethx mirror (where x is the interface number)
Will remove the mirror port mode form the selected network interface
The operation mode will remain in log only mode, but will be possible to change to any other operation
mode by using the appropriate command line parameters or from the GUI
