manualshive.com logo in svg

Nordson EFD E2V, Operating Manual

Share
Download
Nordson EFD E2V Operating Manual Download Page 26

www.nordsonefd.com   [email protected]

   800-556-3484    Sales and service of Nordson EFD dispensing systems are available worldwide.

EV Series Automated Dispensing Systems

26

Primary View Screen and Tab Bar

The Primary View screen changes depending on the selected tab. All the tabs are visible at all times.

Tab Name

Tab Color When 
Selected

Function

Program

Shows the command view; used to create programs.

Camera

Shows the actual camera view; used to perform all camera-related 
functions.

System Setup

Shows the settings screen; used to view or change system-level settings or 
parameters.

DXF

Allows you to load drawings in DXF format into the DispenseMotion 
software. Refer to “Appendix B, DXF File Import” on page 84 for more 
information.

Needle XY 
Adjust

Automatically adjusts the XY offsets without touching the tip to any surface. 
Refer to the correct offset setup procedure under “Setup” on page 34 to 
set up the system for automatic Needle XY Adjust.

Needle Z Detect

If the system includes a tip detector, Needle Z Detect automatically adjusts 
the tip offset (Z clearance) after a dispensing tip change and then performs 
a Needle XY Adjust. Refer to the correct offset setup procedure under 
“Setup” on page 34 to set up the system for automatic Needle Z Detect.

Toggle Probe

When the optional height sensor is installed, lowers or raises the height 
sensor probe. Refer to “Appendix E, Height Sensor Setup and Use” on 
page 97 for all information related to the optional height sensor.

Teach

When the optional start / stop box is connected, this indicator appears on 
the tab bar and flashes when the robot is in the safety bypass mode. When 
the Teach indication is present, the Run button is disabled.

Run

Runs the selected program.

View

Runs the selected program without dispensing and also centers the camera 
on the dispense path.

Pause

Pauses the program that is currently running. When you click on Pause, the 
button changes to Continue.

Summary of Contents for E2V








































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands