30
Connect to mains power
supply
,
ensuring the cable
is not bent.
Lift oven into
the
housing
unit, do not lift the oven
by
the handle
as
the glass
door
may
shatter.
• Once the oven has been lifted into place insert the 4 plastic washers [06] into
the holes located within the sides of the metal casing of the oven and secure
with
the
4 screws [07]
provided
.
• Also ensure that you adjust the furniture doors adjacent to the sides of the
oven
,
so
that
there is a 4-6mm gap between them, otherwise heat displaced
from
the oven might damage the furniture door.
06
x
4
07
x
4
Note:
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order
to avoid a hazard.
Installation
Summary of Contents for DOI414IX
Page 36: ...NORDMENDE SMART LIVING ...