4. Part : USE OF YOUR OVEN
15
4.1 Use of gas burners
•
:
•
.
Ignition of the burners
To determine which knob controls which burner, check the position symbol
above the knob.
Manual Ignition of the Gas Burners
If your appliance is not equipped with any ignition aid or in case there is a
failure in the electricity network, follow the procedures listed below
For Hob Burners:
To ignite one of the burners, press and turn its knob
counter-clockwise so that the knob is in max. position, approach a match, taper
or another manual aid to its upper circumference. Move the ignition source
away as soon as you see a stable flame.
For Oven Burners:
To ignite the oven burner, press and turn the oven control
knob counter-clockwise so that the knob is in max. position, approach a match,
taper or another manual aid to the ignition hole that is located on the front left
corner of the burner. Move the ignition source away as soon as you see a stable
flame.
For Grill Burners:
To ignite the grill burner, turn the grill valve in the clockwise
position until the marker on the knob points at the grill sign. Then, keep the knob
pressed and approach a match, taper or another manual aid to the holes that are
situated on the burner. Move the ignition source away as soon as you see a stable
flame.
Electrical Ignition
Electrical ignition of gas burners can be done in two ways; depending on the
configuration of your appliance
Ignition by Spark Button:
Press the valve of the burner you want to operate
and turn the valve in the counter-clockwise direction so that the knob is in max.
position and with your other hand, press the ignition button at the same time.
Press the ignition button immediately, because if you wait, a build up of gas
may cause the flame to spread. Continue pressing the ignition button until you
see a stable flame on the burner.
Ignition Through Hob Valve (micro switch):
Press the valve of the burner
you want to operate and turn the valve in the counter clockwise direction
(clockwise for the grill burner) so that the knob is in max. position while
keeping the knob pressed. The spark plugs will generate sparks as long as you
keep the control knob pressed. The micro switch placed under the knob will
automatically create sparks through the spark plug of the burner. Continue
