Nordmann DC4 Operating Instructions Manual Download

Page: 6 / 56

For your safety

General

Every person working with the Nordmann RC4/DC4 must have read and understood the operating

instructions before carrying out any work.

Knowing and understanding the contents of these operating instructions is a basic requirement for

protecting the personnel against any kind of danger, to prevent faulty operation, and to operate the

unit safely and correctly.

All ideograms, signs and markings applied to the unit must be observed and kept in readable state.

Qualification of personnel

All actions described in the present operating instructions (operation, maintenance, etc.) must be

carried out only by

well trained and sufficiently qualified personnel authorised by the owner

For safety and warranty reasons any action beyond the scope of this manuals must be carried out

only by qualified personnel authorised by the manufacturer.

It is assumed that all persons working with the Nordmann RC4/DC4 are familiar and comply with the

appropriate regulations on work safety and the prevention of accidents.

This unit may not be used by persons (including children) with reduced physical, sensory or mental

abilities or persons with lacking experience and/or knowledge, unless they are supervised by a person

responsible for their safety or they received instructions on how to operate the unit.

Children must be supervised to make sure that they do not play with unit.

Intended use

The steam humidifier Nordmann RC4/DC4 is intended exclusively for

air humidification via a steam

distributor approved by the manufacturer

(unit versions

Nordmann DC4

)

or via the integrated

ventilation unit

(unit versions

Nordmann RC4

)

within the specified operating conditions

(see

chapter 8 “Product specifications”). Any other type of application without the express written consent

of the manufacturer is considered as not conforming with the intended purpose and may lead to the

Nordmann RC4/DC4 becoming dangerous.

Operation of the equipment in the intended manner requires

that all the information in these in-

structions is observed (in particular the safety instructions)

Summary of Contents for DC4

























































Search results

Summary of Contents for DC4

Reviews:

Related manuals for DC4

Brands by name

Popular brands

Nordmann DC4, Operating Instructions Manual

Search results

Summary of Contents for DC4

Reviews:

Related manuals for DC4

Brands by name

Popular brands