Nordmann Engineering SPA Display, Installation And Operation Manual

Page: 9 / 36

9
4 Installation
4.1 Unpacking and checking the scope of delivery
Unpacking the unit
Open the packing and check the delivery for completeness. Please contact your Nordmann represen-
tative in case something is lacking, they will be glad to send you the missing part without delay. The
standard delivery includes:
– Nordmann
SPA Display in-wall mounted
– Nordmann SPA Display control PCB
– In-wall mounted housing with pre-mounted display mounting supports, fastening claws and
3 magnets
– Plastic bag containing mounting material
– Nordmann SPA Display on-wall mounted
– Nordmann SPA Display control PCB
– On-wall mounted housing
– Plastic bag containing mounting material
– Decoration cover with pre-mounted centring frame and sealing (if ordered)
Please check the equipment for damage. Please report any damage to your Nordmann representative
and to the carriers, as required.
Packaging
The original packaging of the Nordmann SPA Display was designed for optimum safety during transpor-
tation. Please preserve the original packing material in case you once have to return the unit for some
reason.
In case you wish to dispose of the packaging, observe the local regulations on waste disposal. Never
dispose of the packaging to the environment.
4.2 Storing the unit
If the Nordmann SPA Display must be stored, store it in a protected area (best in the original packaging)
meeting the following requirements:
– room temperature: 1 ... 40 °C
– room humidity: 10 ... 80 %rh (non condensing)