Nordmann Engineering SPA Display, Installation And Operation Manual

Page: 22 / 36

22
5. Connect the CAN BUS cable according to the specifications in chapter 4.5 to the Nordmann Omega
or the Condair Delta SPA Control Box, then perform the function tests of the Nordmann Omega SPA
Display.
6. After function tests have been passed carefully place the Nordmann SPA Display onto the on-wall
mounted housing (make sure the supply cable is not getting pinched). Then, fix the Nordmann SPA
Display to the on-wall mounted housing using the four screws supplied. Seal the cable entry at the
bottom of the on-wall mounted housing splash-proof using silicone sealant.
Seal cable entry from below
with slicone sealant
Fig. 19: Mounting the Nordmann SPA Display
7. Finally attach the decoration cover. The decoration cover is held by the magnets in the on-wall
mounted housing.
Fig. 20: Attaching the decoration cover