11
2.10 Resetting the control to factory settings
Caution!
When resetting the control to factory settings, any modified settings in the user level are lost.
Select “
FactoryReset
” in the engineering menu, then press the
<Set>
key.
The reset dialogue shows up in the display. Press the
<Yes>
key to
reset the control to factory set-
tings
. The control is reset to factory settings and restarted.
Note: By pressing the
<No>
key the reset procedure can be aborted. The control returns to the engi-
neering menu.
Engineering
Stop Mode :Switch
Instab.Temp.:Set
FactoryReset:Set
Min.Request :20/25%
Count Down :Set
Esc
Set
FactoryReset
Are you sure?
No
Yes
AT4D
STARTUP:
INIT MODULE
Menu
AT4D 65kg/h 400V3
Steam Bath :Standby
Temperature :34°C
Setpoint :48°C
2011-08-31 12:00:00
Light Start
