INSTALLATION INSTRUCTIONS
Remove the cover and inspect the
well, and clean as necessary.
Fitting tubes are assembled to the
desired length, and are fitted on the
rat blocker.
The rat blocker is lowered into the
well and is inserted into the selec-
ted outlet/inlet until the rat blocker’s
stopper is in contact with the well’s
side.
Then turn the mounting pipe
clockwise until desired tension is
achieved. Removed the alignment
tube, and the installation is ready
for a test flush.
For the test flush, use 6-7 pieces
of toilet paper and 2-3 toilet flushes
from the toilet – you should be able
to visually confirm that the paper
and water is able to pass the rat
blocker unhindered.
After installing the rat blocker, the enclosed sign is mounted at the top of
the well.
