6
3
3. Identify the Right Pedal (60), which is marked
with an “R.”
Using an adjustable wrench,
firmly tighten
the
Right Pedal (60)
clockwise
into the Right Crank
Arm (42).
Tighten the Left Pedal (35)
counterclockwise
into the Left Crank Arm (36).
35
60
36
42
4. Orient the Handlebar Post (21) as shown.
Locate the Adjustment Knob (3) on the front of
the Frame (1). Loosen the Adjustment Knob and
pull it outward. Then, insert the Handlebar Post
(21) into the Frame.
Move the Handlebar Post (21) upward or
downward to the desired position, release
the Adjustment Knob (3) into an adjustment
hole in the Handlebar Post, and then tighten
the Adjustment Knob.
Make sure that the
Adjustment Knob is firmly engaged in an
adjustment hole.
4
21
3
1
5. Attach the Handlebar (22) to the Handlebar Post
(21) with a Handle (25) and an M10 Washer
(23).
Note: The Handle (25) functions like a ratchet.
Turn the Handle clockwise, pull the Handle
outward, turn the Handle counterclockwise, push
the Handle inward, and then turn the Handle
clockwise again. Repeat this process until the
Handle is tight.
5
22
21
23
25
