9
8
8. Orient the Handlebar Post (4) as shown. Have a
second person hold the Handlebar Post near the
Frame (1).
Locate the wire tie in the Handlebar Post (4). Tie
the lower end of the wire tie to the Reed Switch
Wire (61). Pull the upper end of the wire tie until
the Reed Switch Wire is routed through the
Handlebar Post.
Locate the Adjustment Knob (29) on the front of
the Frame (1). Loosen the Adjustment Knob and
pull it outward. Then, insert the Handlebar Post
into the Frame.
Move the Handlebar Post (4) upward or
downward to the desired position, release
the Adjustment Knob (29) into an adjustment
hole in the Handlebar Post, and then tighten
the Adjustment Knob.
Make sure that the
Adjustment Knob is firmly engaged in an
adjustment hole.
Wire Tie
4
61
29
1
7. Orient the Post Bushing (17) as shown, and
insert it into the Frame (1);
make sure that the
top of the Post Bushing is parallel to the top
of the Frame.
Attach the Carriage Plate (42) and the Carriage
Cover (40) to the Seat Carriage (3) with the 1/4"
x 1" Screw (63).
7
63
40
42
3
1
17
