27
5. Use WiFi–Advanced to set up a wireless
connection.
This option will allow you to set up a wireless
network connection using your computer, smart
phone, tablet, or other Wi-Fi device.
On your computer, smart phone, tablet, or other
Wi-Fi device, open the list of available networks
to which your device can connect. One of the
options will be IFIT_SETUP; select this network. If
this network does not appear, make sure that your
Wi-Fi device is within range of the console, and
then close and re-open your list of networks. Also,
see CLEAR WIFI SETTINGS on page 26 and
clear any previous wireless network settings on the
console.
Note: The network IFIT_SETUP will not appear
if the console has already been configured to
connect to a wireless network. Also, Android™
devices may not be able to detect IFIT_SETUP.
The console will display an IP address, such as
192.168.0.1:8080. Open a web browser on your
computer, smart phone, tablet, or other Wi-Fi
device. Next, type in the IP address on the con-
sole into the URL bar in your browser. Example:
http://192.168.0.1:8080.
Your browser will load a web page. If the web page
does not appear, double-check the IP address and
the previous instructions of this step. Follow the
instructions on the web page to connect the exer-
cise bike console to your wireless network.
Note: A warning may appear stating that the server
cannot be identified. If this happens, make sure
that you have entered the IP address correctly.
Then, cycle the power of the exercise bike: unplug
the power adapter, wait for several seconds, and
then plug in the power adapter. Note: It may take a
few minutes for the console to be ready for use.
When the console is connected to a wireless
network,
the wireless symbol in the display will
stop flashing or filling and become solid. The wire-
less symbol will show the strength of your wireless
signal; four arcs indicate full signal strength.
If you cannot complete any part of this
process, or if you have any questions, go to
support.ifit.com for assistance.
6. Exit the information mode.
To exit the information mode, press Settings button.
HOW TO USE THE SOUND SYSTEM
To play music or audio books through the console
sound system while you exercise, plug a 3.5 mm male
to 3.5 mm male audio cable (not included) into the jack
on the console and into a jack on your MP3 player,
CD player, or other personal audio player;
make sure
that the audio cable is fully plugged in. Note: To
purchase an audio cable, see your local electronics
store.
Next, press the play button on
your personal audio player.
Adjust the volume level using the
volume increase and decrease
buttons on the console or the
volume control on your personal audio player.
THE OPTIONAL CHEST HEART RATE MONITOR
Whether your
goal is to
burn fat or to
strengthen
your cardiovas-
cular system,
the key to
achieving the
best results is
to maintain the
proper heart
rate during your workouts. The optional chest heart
rate monitor will enable you to continuously moni-
tor your heart rate while you exercise, helping you
to reach your personal fitness goals.
To purchase a
chest heart rate monitor, please see the front cover
of this manual.
Note: The console is compatible with all BLUETOOTH
®
Smart heart rate monitors.
Summary of Contents for COMMERCIAL VR23
Page 4: ...4 ...
