9
3. Set a sturdy piece of packing material under the
front of the Frame (1).
Have a second person
hold the Frame to prevent it from tipping
while you complete this step.
Orient the Front Stabilizer (15) as shown. Attach
the Front Stabilizer to the Frame (1) with two
M10 x 122mm Screws (65).
Remove the packing material.
1
3
65
15
4
2
42
43
1
Wire Tie
Wire Tie
4. Orient the Upright (2) as shown. Have a second
person hold the Upright near the front of the
Frame (1).
Tie the lower end of the wire tie in the Upright (2)
to the Main Wire (43) and the Frame Pulse Wire
(42) in the Frame (1).
Pull the upper end of the wire tie until the wires
are routed through the Upright (2).
Summary of Contents for COMMERCIAL VR23
Page 4: ...4 ...
